Friday, 13 March 2015

An Introduction to Polarising Filters

Using a filter is very much a personal choice. When I started photography I tended to use UV filters on all of my lenses. While the UV filters did not alter the images a great deal, they did offer a certain level of protection to my lenses from things such as dust and sand. It is a good idea to buy high quality filters if you can afford to. Using a cheap filter on an expensive lens is likely to degrade the quality of your images by introducing vignetting and sun flare, for example.

These days I tend to use polarising filters most of the time when photographing outside. Light is polarised when it is reflected from a transparent material. For example, light in the sky will be polarised when it passes through water droplets in the atmosphere. This can create glare which in turn can appear on your photographs. Polarising filters remove most polarised light and in doing so, enhance colours such as blues in the sky while reducing reflections such as those on water. When using polarising filters you should keep in mind the fact that the filters will reduce the exposure by around 1 to 2 stops. To counteract this, you may need to slow the shutter speed, or adjust the exposure compensation to capture the image you are seeking. Slowing the shutter speed might of course mean that you will need to use a tripod to stabilise the camera for some situations.

There are two main types of polarising filters, circular and linear. Without delving too deeply into the science, both filters produce the same sort of photographs but the difference is in how they interact with your camera. A linear filter will work on a manual camera as you control all of the settings. The linear filter works by removing all polarised light which would otherwise reach the lens but as you control the settings, the camera does not need any polarised light in order to work. However, digital SLR cameras need some polarised light in order to perform certain functions such as auto-focus, and auto-exposure. The circular polariser allows just enough polarised light through to let the camera work properly. My polarising filters are all circular and these screw straight onto the end of the lens.  

So, looking at the filter in action. The photograph below was taken without using a polarising filter:
Compare that with the following picture which was taken with a polarising filter:
The difference between the pictures is subtle but you can see a little more colour in the sky, and greater contrast between the clouds and the blue.

It might be clearer in the following images. The first image is the one without the filter. I've ringed a patch of sky where I think the difference is particularly noticeable:
And here is the image with the polariser, with the same patch of sky ringed:
In the second image, the clouds are defined more clearly, and the contrast between the clouds and the sky is more noticeable. 

The following two images show the difference a polarising filter makes when used to shoot a cloudy sky. The first picture does not use a filter, while the second one uses a polarising filter.



The cloud contrasts are much more marked in the second photograph in which I used the filter. You do however lose some of the detail of the field. Shooting in Raw will enable you to draw out some of these lost details. See my posts on Raw images for more information; you can find the first post here and the follow up here.

That's all for the moment, keep enjoying your photography.